Impey Aqua-Dec Wetroom Floor Formers

Accept no imitations! The Aqua-Dec is the original wetroom floor former designed and manufactured by Impey UK.

A floor former is a shower tray that is set into the floor rather than on top of it and ‘forms’ the necessary gradient to allow efficient drainage.

Once installed, the Aqua-Dec provides a completely open-plan shower area with no tray, steps or protrusions - just glorious, useable space and because it is lightweight it can be easily installed by
a single tradesman.

Designed for UK timber and concrete floors. Ideal for upstairs installations. Supplied as standard with the DSS1/H water trap and grate A design, unless otherwise selected. (other drainage options are also available for purchase separately).

See our comprehensive F.A.Q.'s page for full details about Impey products.

Impey Aqua-Dec Wetroom Floor Formers
Aqua-Dec AD1

• 22mm thick (ideal for timber floors)
• The Aqua-Dec is also suitable for setting into concrete floors
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (1250mm x 750mm)
• Trimable (up to 30mm on perimeters)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty

Dimensions: 1300mm x 800mm

Model: Aqua-Dec 1 AD1

Impey Aqua-Dec Wetroom Floor Formers
Aqua-Dec AD2

• 22mm thick (ideal for timber floors)
• The Aqua-Dec is also suitable for setting into concrete floors
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (950mm x 950mm)
• Trimable (up to 30mm on perimeters)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty

Dimensions: 1000mm x 1000mm

Model: Aqua-Dec 2 AD2

Impey Aqua-Dec Wetroom Floor Formers
Aqua-Dec AD3

• 22mm thick (ideal for timber floors)
• The Aqua-Dec is also suitable for setting into concrete floors
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (1450mm x 750mm)
• Trimable (up to 30mm on perimeters)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty

Dimensions: 1500mm x 800mm

Model: Aqua-Dec 3 AD3

Impey Aqua-Dec Wetroom Floor Formers
Aqua-Dec AD4

• Tiling upstand on sides nearest the drain
• 22mm thick (ideal for timber floors)
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (850mm x 850mm)
• Trimable (up to 30mm on edges furthest from the drain)
• Corner drainage only
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty
• Note: the two edges nearest the waste outlet cannot be trimmed due to 22mm upstands which are essential for rigidity.  These edges will also need to be chased into the wall to allow for tiling.

Dimensions: 900mm x 900mm

Model: Aqua-Dec 4 AD4

• Tiling upstand on sides nearest the drain
• 22mm thick (ideal for timber floors)
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (750mm x 750mm)
• Trimable (up to 30mm on edges furthest from the drain)
• Corner drainage only
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty
• Note: the two edges nearest the waste outlet cannot be trimmed due to 22mm upstands which are essential for rigidity.  These edges will also need to be chased into the wall to allow for tiling.

Dimensions: 800mm x 800mm

Model: Aqua-Dec 5 AD5

Impey Aqua-Dec Wetroom Floor Formers
Aqua-Dec AD6

• 22mm thick (ideal for timber floors)
• The Aqua-Dec is also suitable for setting into concrete floors
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (1350mm x 850mm)
• Trimable (up to 30mm on perimeters)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty

Dimensions: 1400mm x 900mm

Model: Aqua-Dec 6 AD6

• 22mm thick (ideal for timber floors)
• The Aqua-Dec is also suitable for setting into concrete floors
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (1150mm x 1150mm)
• Trimable (up to 30mm on perimeters)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty

Dimensions: 1200mm x 1200mm

Model: Aqua-Dec 7 AD7

• Trimable length for custom fit (up to 200mm at each end)
• Trimable width for custom fit (up to 75mm at each side)
• 22mm thick (ideal for timber floors)
• 1-in-40 gradient (17mm drop from outer edge to waste outlet)
• Built-in graded area (variable)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty

Dimensions: 1850mm x 900mm

Model: Aqua-Dec 8 AD8

• 25mm thick (at extreme edges)
• 1-in-40 gradient (20mm drop from outer edge to waste outlet)
• Built-in graded area (variable size)
• Trimable (50mm +)
• Fully reversible (to avoid joists)
• Pumped drainage compatible
• Supplied as standard with waste trap DSS1/H (horizontal outlet for tiled floors) unless different trap selected
• Please see the Impey Drainage page for details of other traps and grates
• 15 Years warranty
• Note: the AD9 is the same as the AD7 but comes with 500mm trimable graded mitred extensions
  

Dimensions: 1700mm x 1700mm

Model: Aqua-Dec 9 AD9