Impey Aqua-Dec & Aqua-Grade Drainage Options

Impey offers a range of drainage and grate options to perfectly compliment your wetroom floor, for use with Aqua-Dec and Aqua-Grade floor formers.

Impeys drainage options are the most versatile on the market. The high quality stainless steel grate is 5mm thick and has a contemporary and modern design. The drainage options also come with a removal hook that allows the grate to be removed for easy maintenance.

The height adjustable ring rotates and vary in height to suit different tile depths. This unique feature means the gully can be used with varying tile depths between 6-26mm depending on waterproof membrane and adhesive thickness.

The membrane clamping ring secures the Tilesafe tanking membrane into place creating a secure watertight seal at the drainage point.

Note: All Aqua-Dec and Aqua-Grade floor formers come with your desired drainage trap as standard (excluding the Dry-Deck Pump kit). This page is therefore intended for reference or if purchasing drainage as a separate/additional item.

See our comprehensive F.A.Q.'s page for full details about Impey products.

Please note - ALL Impey products are special order and non-returnable, please ensure you order the correct items/sizes as mistakes cannot be rectified. Delivery normally within 3 working days.

Impey Drainage Options
Grate Options

Details:

• 4 grate options available for use with trap models DSS1/H, DSS1/V and DSS2 below.
• 115mm x 115mm
• 5mm thick high quality stainless steel
• Grate A provided as standard unless alternative selected.

Model: N/A

Impey Drainage Options
DSS1/H - Tiled Floor Gully Horizontal Outlet

Details:

• Depth 126mm
• Height adjustable stainless steel top with 50mm water seal
• Suitable for floor tiles between 6mm and 26mm in depth
• 4 grate options available (see above)

Supplied as standard with all Aqua-Dec and Aqua-Grade floor formers unless otherwise specified.

Model: Impey Drain DSS1/H

Impey Drainage Options
DSS1/V - Tiled Floor Gully Vertical Outlet

Details:

• Depth 215mm
• Height adjustable stainless steel top with 50mm water seal
• Suitable for floor tiles between 6mm and 26mm in depth
• 4 grate options available (see above)

Model: Impey Drain DSS1/V

Impey Drainage Options
DSS2 - Tiled Floor Gully For Pumped Waste

Details:

• Depth 38mm
• Height adjustable stainless steel top
• Suitable for floor tiles between 6mm and 26mm in depth
• Allows water to be pumped away when used in conjunction with the Impey Dry-Deck 20 pump
• 4 grate options available (see above)

Model: Impey Drain DSS2

Impey Drainage Options
DSS3/H - Vinyl Floor Gully Horizontal Outlet

Details:

• Depth 130mm
• Stainless steel top and clamping ring for vinyl flooring with 75mm water seal

Model: Impey Drain DSS3/H

Impey Drainage Options
DSS5/H - Vinyl Floor Gully Horizontal Outlet

Details:

• Depth 127mm

Model: Impey Drain DSS5/H

Impey Drainage Options
DSS5/V - Vinyl Floor Gully Vertical Outlet

Details:

• Depth 216mm

Model: Impey Drain DSS5/V

Impey Drainage Options
Dry Deck 20 Pumped Drainage

In many contemporary showers and wet rooms a gravity drain is not a feasible option. In a loft conversion, where room height is constrained, or in a basement where the waste water outlet is higher than the gully, an alternative system is required. The Dry-Deck 20 provides the solution.

This low voltage pump system is quiet, compact and can be concealed so as not to compromise the rooms aesthetics. It provides a reliable solution requiring no regular maintenance.

Details:

• The flow rate of the Dry-Deck20 system automatically adjusts to changes in shower flow rate
• Almost silent when running
• No filter in waste system - no cleaning required
• Valves integral to the pump prevent odours escaping from the drainage pipe
• Maximum flow rate 20 ltr/min
• Capable of pumping up to the ground floor waste outlet - ideal for basement shower installations
• Kit comprises of 2 x Flow Sensors, Control Unit, Transformer & Dry-Deck 20 Pump
  

Model: Impey Dry Deck 20 Pump Kit TS1