Original Bathroom Company The place for beautiful bathrooms...
Free Delivery
All Our Prices Include VAT - The Price You See Is The Price You Pay
Accessories Bathroom Furniture Bathroom Lighting Bathroom Cabinets Bathroom Mirrors Bathroom Towel Rails Bathroom Showering Bathroom Taps Miscellaneous Items
This site uses cookies, click here for more information Advanced Search
Showers & Shower Accessories
Home > Showering > Impey Wetroom Waterproofing Systems
Impey Wetroom Systems

Impey Wetroom Waterproofing Kits

Impey Tilesafe Layer

Impey Tilesafe & Waterguard Wetroom Waterproofing Kits

Waterproofing or 'tanking' a wetroom involves applying a waterproof layer to the floor of the shower zone, because no matter how well the tiles have been fixed, over time water will always find a way through the tiles/ grout which can lead to leaks and costly repairs.

Impey now offer a choice of two waterproofing membranes, Tilesafe and Waterguard, both in 5m2 or 10m2 kits.

Call our friendly staff on 01772 422520 if you need any help or advice, or prefer to order on the phone.


Impey Tilesafe & Waterguard Wetroom Waterproofing Ranges

Impey Tilesafe 5m2 Waterproofing Kit

Range: Impey - Waterproofing

Item Code: TS2

Details: Tilesafe is a bitumen-based tanking membrane for waterproofing shower zones etc. It is a flexible rubberised self-adhesive waterproof membrane sheet that comes on a roll and consists of a thick bitumen based layer that incorporates a woven glass fibre mesh on one side for the application of tiles. Once applied there is no curing time so it is possible to fix the tiles the same day.

Impey Tilesafe should be applied to a minimum height of 75mm where the walls of the room meet the floor as an added precaution. However, there is a maximum weight limit for wall mounted tiles when using Tilesafe and this should not exceed 20kg/m2.

Any proprietary flexible tile adhesive can be used with the Impey Tilesafe waterproofing system. Tile adhesive must be a single-part flexible cement based adhesive. Do NOT use a ready mix adhesive or epoxy based grout.

Impey UK recommend tanking the shower floor to at least 1m beyond the edges of the Dec area (ideally the entire floor should be covered), with particular attention to the join where the Dec meets the surrounding floor.

The Tilesafe can be used with underfloor heating, but it is only suitable for use with 100 watt systems such as Aquamat. Other systems that run at a higher temperature may compromise he integrity of the tanking system.

Kit Contents: 5m2 Tilesafe membrane (5m roll, 1m wide), 1/2 litre Tilesafe primer, 10m reinforcing tape (150mm wide), jointing compound, repair putty.

Delivery: Delivered direct from Impey, normally approx 2-5 working days.

Item Code Kit Size RRP Our Price Free Delivery On
This Item (UK Mainland)
TS2 5m2 327.92 262.34
Add To Basket

Impey Tilesafe 10m2 Waterproofing Kit

Range: Impey - Waterproofing

Item Code: TS1

Details: Tilesafe is a bitumen-based tanking membrane for waterproofing shower zones etc. It is a flexible rubberised self-adhesive waterproof membrane sheet that comes on a roll and consists of a thick bitumen based layer that incorporates a woven glass fibre mesh on one side for the application of tiles. Once applied there is no curing time so it is possible to fix the tiles the same day.

Impey Tilesafe should be applied to a minimum height of 75mm where the walls of the room meet the floor as an added precaution. However, there is a maximum weight limit for wall mounted tiles when using Tilesafe and this should not exceed 20kg/m2.

Any proprietary flexible tile adhesive can be used with the Impey Tilesafe waterproofing system. Tile adhesive must be a single-part flexible cement based adhesive. Do NOT use a ready mix adhesive or epoxy based grout.

Impey UK recommend tanking the shower floor to at least 1m beyond the edges of the Dec area (ideally the entire floor should be covered), with particular attention to the join where the Dec meets the surrounding floor.

The Tilesafe can be used with underfloor heating, but it is only suitable for use with 100 watt systems such as Aquamat. Other systems that run at a higher temperature may compromise he integrity of the tanking system.

Kit Contents: 10m2 Tilesafe membrane (10m roll, 1m wide), 1 litre Tilesafe primer, 15m reinforcing tape (150mm wide), jointing compound, repair putty.

Delivery: Delivered direct from Impey, normally approx 2-5 working days.

Item Code Kit Size RRP Our Price Free Delivery On
This Item (UK Mainland)
TS1 10m2 442.93 354.34
Add To Basket

Impey Waterguard 5m2 Waterproofing Kit

Range: Impey - Waterproofing

Item Code: WG5

Details: Waterguard is a new fleece membrane with a self adhesive butyl rubber backing, which is faster and easier to install. Comes with pre-made corners for faster and easier installation. No curing time to enable faster application.

We advise that waterproofing membrane is applied to the entire floor area to guarantee a completely watertight finish.

Can be used with epoxy grout and solvent based sealers for stone tiles, unlike Tilesafe. Waterguard cannot be overlapped, so a jointing tape is supplied to create a watertight seal at any joints.

Waterguard is safe for use with 150W/m2 underfloor heating systems on concrete floors and 100W/m2 on timber floors.

Kit Contents: 5m2 Waterguard membrane (5m roll, 1m wide), 500ml BAL primer, 15m jointing tape (150mm wide), 4 internal corners, 1 external corner, butyl sealant.

Delivery: Delivered direct from Impey, normally approx 2-5 working days.

Item Code Kit Size RRP Our Price Free Delivery On
This Item (UK Mainland)
WG5 5m2 278.74 222.99
Add To Basket

Impey Waterguard 10m2 Waterproofing Kit

Range: Impey - Waterproofing

Item Code: WG10

Details: Waterguard is a new fleece membrane with a self adhesive butyl rubber backing, which is faster and easier to install. Comes with pre-made corners for faster and easier installation. No curing time to enable faster application.

We advise that waterproofing membrane is applied to the entire floor area to guarantee a completely watertight finish.

Can be used with epoxy grout and solvent based sealers for stone tiles, unlike Tilesafe. Waterguard cannot be overlapped, so a jointing tape is supplied to create a watertight seal at any joints.

Waterguard is safe for use with 150W/m2 underfloor heating systems on concrete floors and 100W/m2 on timber floors.

Kit Contents: 10m2 Waterguard membrane (10m roll, 1m wide), 500ml BAL primer, 20m jointing tape (150mm wide), 4 internal corners, 1 external corner, butyl sealant.

Delivery: Delivered direct from Impey, normally approx 2-5 working days.

Item Code Kit Size RRP Our Price Free Delivery On
This Item (UK Mainland)
WG10 10m2 376.49 301.19
Add To Basket
The Original Bathroom Company 84 Liverpool Road Longton Preston Lancashire PR4 5NB 01772 611622
The Original Bathroom Company Ltd
Terms And Conditions
Website Dept: 18b Boxer Place, Moss Side Industrial Estate, Leyland, Lancashire, PR26 7QL. Website Tel: 01772 422520
(Showroom: 84 Liverpool Road, Longton, Preston, Lancashire, PR4 5NB. Showroom Tel: 01772 611622)

Company Registered in England and Wales No. 4539109, VAT No. 784070422
Delivery Information Home About Us Contact Us View Basket